Best Practices for Safety When Using Sheet Bending Machines

Sheet bending machines are powerful tools that can be hazardous if not used properly. By following these best practices for safety, you can help to prevent accidents and injuries.

Wear Proper Clothing and Safety Gear

When working with sheet bending machines, it is important to wear the proper clothing and safety gear. This includes long sleeves, long pants, safety glasses, and gloves. Loose clothing or jewelry can get caught in the machine and cause serious injury.

In addition to wearing the proper clothing, you should also make sure that your hair is tied back and that you are not wearing loose jewelry or clothing. These items can also get caught in the machine and cause injury.

Inspect the Machine Before Each Use

Before each use, you should inspect the sheet bending machine to make sure that it is in good working condition. This includes checking the following:

The machine’s frame and components for any signs of damage or wear

The machine’s hydraulic lines and fittings for any leaks

The machine’s electrical connections for any loose wires or connections

If you find any damage or problems with the machine, do not use it until it has been repaired by a qualified technician.

Clear the Work Area

Before beginning work, you should clear the work area of any debris or obstacles. This will help to prevent accidents and injuries.

You should also make sure that the work area is well-lit and that there is plenty of space to move around.

Secure the Sheet Metal

Before bending the sheet metal, you should secure it to the machine’s table. This will help to prevent the sheet metal from moving during the bending process and causing injury.

You can secure the sheet metal using clamps or other appropriate methods.

Use the Correct Tools and Techniques

When bending sheet metal, you should use the correct tools and techniques. This will help to prevent damage to the sheet metal and to the machine.

You should use the correct die for the type of bend that you are making. You should also use the correct pressure and speed for the thickness of the sheet metal.

Be Aware of Pinch Points

Pinch points are areas where the sheet metal can be pinched between the machine’s dies. These areas can be very dangerous and can cause serious injury.

You should be aware of all of the pinch points on the machine and you should avoid placing your hands or fingers in these areas.

Follow the Manufacturer’s Instructions

It is important to follow the manufacturer’s instructions when using a sheet bending machine. These instructions will provide you with the information that you need to operate the machine safely and efficiently.

If you have any questions about the manufacturer’s instructions, you should contact the manufacturer for clarification.