
Laser Protection Lens Selection And Installation Considerations
- By:Metmac
- 2023-04-24
- 91
Laser protection lens, also called laser focus lens, laser focus lens is a more precise optical components, laser protection lens is very important to laser equipment, its cleanliness directly affects the processing performance and quality of laser equipment. If the lens is not selected properly will cause laser loss, frequent damage to the protective lens, product quality is not stable, causing serious losses to the enterprise. Although the protective lens of laser equipment is a perishable part, but in order to improve its utilization rate and reduce production costs, the purpose of reuse can be achieved by cleaning the protective lens at regular intervals. Therefore, the protective lens of laser equipment should be maintained regularly.
When laser equipment is cutting, marking, welding and other operations on the material, the material surface will release a lot of gas, slag and spatter, and the laser protection lens, which is used to protect the gathering lens from damage during the cutting process.
At the same time in the installation and cleaning process of the protective mirror, any sticky substances, even nail printed with oil droplets, will increase the absorption rate of the lens and shorten the service life. Therefore, the cleaning of the lens should not be neglected:
- When mounting, gloves must be worn without leaving any fingerprints; please do not scratch the surface of the lens with anything;
- When holding the lens, please grasp the lens with both hands. edges, do not touch the film;
- Clean the lens with clean thin paper, paper and optical grade solvent;
Protective lenses for laser equipment are a consumable item. When the cleanliness is still not high after several cleanings, please pay attention to replace them to ensure the processing efficiency of the laser equipment so as not to delay production.
-
How to Do the Unfolding Drawing of Hvac Round Elbow Duct
2022-07-10 -
Air Conditioning and Ventilation Design of Radiotherapy Room in Hospital
2022-07-12 -
What is Pipeline and Hvac Air Duct Seismic Bracing System
2022-07-14 -
The Differences Of Bending Machines And Press Brakes And Its Applications
2023-02-16 -
Side Column Manufacturing Process Research
2023-02-27 -
Large Format Laser Cutting Machine Introduction
2023-03-07 -
Common Problems Encountered In Sheet Metal Bending
2023-03-21 -
Automatic Bending Center In Air Conditioner Electric Control Box Process
2023-04-03 -
Laser Protection Lens Selection And Installation Considerations
2023-04-24
CONTACT US


Guangzhou Metmac Co., Ltd.
We are always providing our customers with reliable products and considerate services.
If you would like to keep touch with us directly, please go to contact us
-
1
Hey friend! Welcome! Got a minute to chat?
Speak Your Mind