contact us

METMAC Incorporated

We provide customers with quality products and provide high-quality services


If you would like to leave us a comment please go to

Contact Us

Interesting points When Deciding Upgrade Slitting Line Machine

  • source:;
  • Time:06/03/2021

How Metal Slitting Line Machines Work


When concluding whether to overhaul metal slitting line machines, there are numerous variables that should be thought of. A metal slitter is a piece of machinery that takes sheet metal and cuts it into smaller widths relying upon the requirements of the client and application. The Kloeckner Metals Tulsa, Oklahoma, office can handle curls of both ferrous and non-ferrous metal as much as 60,000 pounds. The widths are regularly somewhere in the range of 10 and 72 inches wide however can go as low as .500".


The material is strung through a couple of rotating arbors and steel cuts that are exactness ground for tight resilience slitting. The single approaching width is cut into a few pieces of smaller widths. For instance, a 48.500" inch wide sheet can be separated into four cuts of 12.00". When the sheet metal is cut, it is folded once more into loop structure at the leave stopping point.


Motivations to Upgrade


The most clear thought when purchasing new slitting line machine will be the measure capacities. Principally utilizes light check slitters, handling ferrous and non-ferrous material from .012" in thickness up to a .250". Material thickness more prominent than .250" would be viewed as substantial measure. Client requests will direct what measure prerequisites are required. Growing check abilities in your cycle can open up new clients, however.


On a comparative note, new clients can make a requirement for new gear. An organization that fundamentally manages light check applications may track down a couple of agreement clients that require hefty measure material. In the event that the interest is sufficiently incredible, it could legitimize the capital consumption for another preparing line. Furthermore, when current machines arrive at limit at that point new slitting line machines could get important to keep growing your client base.


The other fundamental factor which would require new slitting line machine would be that the current hardware is obsolete. Eventually the support and upkeep necessities of old hardware surpass the worth of the machine. As such, proceeding to assign cash-flow to redesign or keep a resource solid no longer bodes well.