GUANGZHOU METMAC CO., LTD

Address: 2D16 HuaTing Road 4,
TianHe District, Guangzhou, China

Tel: +86 (20) 8523 8159 E-mail: info@metmac.com

Hydraulic swing beam shear

The upper cutting beam moves at an angle and along an arc in relation to the bottom, which provides an accurate cut on any metal thickness. Sturdy constructions, the frames and beams prevent deflection and provide quality cutting. The knife lowering timer allows increase the number of cuts per minute when working with small sheets. The controller controls the amount of knife lowering when cut not for the entire length of the blades, but also positions rear stop depending on the set parameters in cutting sheet. In the controller memory is stored information about cut materials and cutting sheets.

MACHINE PICTURE

X Axis------- back gauge position is showed through digital dispaly

adjusting gap-------- gap between upper and bottom blade through the hand wheel to adjust

Main Performance ：

1. the frame and blade’s holder are both welded construction, vibration to eliminate stress with good precision.

2. the blade’s holder adopting rolling guiding way with three point support, cutting precision could be maintained well with good cutting quality.

3. the gap between upper and bottom blades could be fast adjusted through hand wheel.

4. rectangular blade has four edges to use to long service life. the cutting angle could be adjusting to relief the deflection of working piece

5. the top blades’ holder adopts inner slanting construction to ease unloading working piece to promote the quality of work piece. the stroke of top blade holder could be adjusted stepless.

6. the position of the back gage is showed on the digital dispaly

MODEL	THICKNESS(мм)	LENGTH (мм)	DISTANCE BETWEEN UPRIGHTS(мм)	STROKES(CYCLE/MIN)	BACKGAUGE RANGE(мм)	SHEAR ANGLE(°)	WORKING TABLE HEIGHT(мм)	THROAT DEPTH (мм)	MAIN MOTOR(KW)	HYDRAULIC OIL FLOW RATE(L)	WEIGHT (KG)
QC12K-4X2500	4	2500	2710	25	800	1.5	800	250	7.5	240	4800
QC12K-4X3200	4	3200	3410	20	800	1.5	800	250	7.5	290	6400
QC12K-4X6000	4	6000	6190	10	800	1.5	850	250	11	290	16000
QC12K-6X2500	6	2500	2720	20	800	1.5	800	250	7.5	240	5500
QC12K-6X3200	6	3200	3420	18	800	1.5	800	250	7.5	290	6600
QC12K-6X4000	6	4000	4220	15	800	1.5	800	250	7.5	388	8900
QC12K-6X5000	6	5000	5620	12	800	1.5	850	250	11	380	14000
QC12K-6X6000	6	6000	6230	10	800	1.5	850	250	11	380	-
QC12K-8X2500	8	2500	2760	14	800	1.5	800	250	11	240	6000
QC12K-8X3200	8	3200	3460	12	800	1.5	800	250	11	380	8500
QC12K-8X4000	8	4000	4260	10	800	1.5	800	250	11	380	9800
QC12K-8X5000	8	5000	5255	8	800	1.5	850	250	11	380	16000
QC12K-8X6000	8	6000	6225	6	800	1.5	850	250	11	380	22000
QC12K-12X2500	12	2500	2755	12	800	1.5	810	320	18.5	290	9500
QC12K-12X3200	12	3200	3465	9	800	1.5	810	320	18.5	400	12500
QC12K-12X4000	12	4000	4265	7	800	1.5	810	320	18.5	450	15000
QC12K-12X5000	12	5000	5275	6	800	1.5	850	320	18.5	450	23500
QC12K-12X6000	12	6000	6245	5	800	1.5	1000	320	18.5	450	33000
QC12K-16X2500	16	2500	2755	7	800	2.5	810	320	22	290	12000
QC12K-16X3200	16	3200	3485	6	800	2.5	810	320	22	400	15500
QC12K-16X4000	16	4000	4285	5	800	2.5	810	320	22	450	19500
QC12K-16X5000	16	5000	5275	4	800	2.5	1000	320	22	450	30000
QC12K-16X6000	16	6000	6265	4	1000	2.5	1010	320	22	450	46000
QC12K-20X2500	20	2500	2785	6	1000	2.5	850	320	37	330	18000
QC12K-20X3200	20	3200	3485	5	1000	2.5	830	320	37	430	22000
QC12K-20X4000	20	4000	4285	5	1000	2.5	830	320	37	480	25000
QC12K-25X2500	25	2500	2805	5	1000	2.5	850	320	45	330	19500
QC12K-25X3200	25	3200	3505	5	1000	2.5	850	320	45	330	26000
QC12K-25X4000	25	4000	4305	4	1000	2.5	1000	320	45	480	32000
QC12K-32X2500	32	2500	2905	4	1000	3.5	1000	320	55	330	35000
QC12K-32X3200	32	3200	3605	4	1000	3.5	1000	320	55	400	40000
QC12K-32X4000	32	4000	4405	3	1000	3.5	1150	320	55	480	46000