contact us

METMAC Incorporated

We provide customers with quality products and provide high-quality services

看不清,请点击我!

If you would like to leave us a comment please go to

Contact Us

  • logo


  • GUANGZHOU METMAC CO., LTD

    Address: 2D16 HuaTing Road 4,
    TianHe District, Guangzhou, China

    Tel: +86 (20) 8523 8159 E-mail: info@metmac.com

WD43M Leveling machines

WD43M Leveling machines

WD leveling machine is used in flatting plate in different thickness, width and yield strength. The surface of the plate is flat and smooth after flatted. The machine is easy for maintaining, and with good appearance and long using life time.

 

leveling-machine-230-4    leveling-machine-230-2    leveling-machine-230-1

 

This WD kind of machine has the special structure, which is the best model for plate leveling, especially for high tensile plate and the plate with big deformation.

A. The top cross beams are independent, each top working rollers are installed on the independent crossbeams, so that each roller position can be adjusted individually, that means the top rollers can form a “V or W” type arrangement, and the rollers for the common machine always just form a straight line arrangement. so this kinds of machine is better for high tensile and irregular plate straightening.

B. Two master motors drive the bottom rollers. The plate in the input end is almost flat when the plate is feed into the machine, the linear speed at contact points is almost the same at this time, and then the plate will be go through the other roller and will be bend in some degrees, so the contact surface is curved, so that partly linear speed will not be the same, that means the linear speed during the plate leveling is not the same ,so if all the rollers speed is the same ,that will cause slide friction between the plate and the rollers, so we divide the bottom rollers into two groups and that we adopt two motors drive the bottom rollers, the small friction between each groups rollers can be ignored. Of course if one motor drives one rollers will be best, but that will cause large size of the machine, and occupy too many space, That will cause more mechanical interference if all rollers are dirven by one motor. So that we often divide the bottom rollers into two groups, each group of rollers are driven by one set of motor and reduction box.

C.Each top roller is installed a axis outfit motor reducer, and each top roller rotating speed can be consistent with the contact part of the plate, so that eliminate the sliding friction between the rollers and the plate.

Technical parameters

Model Max Thickness
(mm)
Min thickness
(mm)
Width
(mm)
Yield strength
(Mpa)
Leveling roller diameter
(mm)
Leveling rollers distance
(mm)
No. of Leveling roller Speed
(m/min)
Motor
(kw)
WD43M-1.2X1000 1.2 0.6 1000 240 40 42 19 10 7.5
WD43M-2.5X1250 2.5 0.8 1250 360 55 60 19 10 15
WD43M-3.0X1300 3 0.8 1300 280 60 65 17 10 15
WD43M-3.0X1600 3 0.8 1600 360 75 80 15 10 18.5
WD43M-4.0X1300 4 0.8 1300 360 75 80 15 11 22
WD43M-4.0X1600 4 0.8 1600 360 75 80 15 10 22
WD43M-6.0X1600 6 1.5 1600 360 95 100 13 8 30
WD43M-6.0X2000 6 1.5 2000 360 95 100 13 9 37
WD43M-8.0X1600 8 2 1600 360 120 125 13 9 37
WD43M-8.0X2000 8 2 2000 360 120 125 13 8 37
WD43M-10X1600 10 2.5 1600 360 140 150 13 9 37
WD43M-10X2000 10 2.5 2000 360 140 150 13 9 45
WD43M-12X1600 12 3 1600 360 140 150 13 9 45
WD43M-12X2000 12 3 2000 360 150 160 11 9 55
WD43M-16X1600 16 4 1600 360 160 180 11 7 63
WD43M-16X2000 16 4 2000 360 180 200 11 8 75
WD43M-16X2500 16 4 2500 360 180 200 11 7 75
WD43M-16X3200 16 4 3200 360 180 200 11 7 75
WD43M-20X2000 20 5 2000 360 200 220 9 7 63
WD43M-20X2500 20 5 2500 360 200 220 9 7 75
WD43M-20X3200 20 5 3200 360 200 220 9 6 75
WD43M-25X2000 25 6 2000 360 200 220 9 6 75
WD43M-25X3200 25 6 3200 360 260 300 9 6 90
WD43M-30X2000 30 6 2000 360 260 300 9 6 90
WD43M-30X2500 30 6 2500 360 260 300 9 6 90
WD43M-30X3200 30 8 3200 360 260 300 9 6 90
WD43M-40X2500 40 10 2500 360 340 400 7 5 110

After sales service

We not only apply ourselves to develop the new products and improve our products’ quality, but also build a quite perfect after sales service network all over the world and supply more convenience and better service for our customers.

We supply the foundation fig of the machine’s installation but not constructing. We take charge of the machine’s installation and adjustment if you supply the lifting equipment and necessary conditions. Please let us know the list of accessories before the machine leaves the factory.

1. When the machine is finished, we will inform you to inspect the machine in our factory. After your inspection and acceptance, the machine will be shipped.

2. During installing the machine, we supply free training and technical consultation service, buyer be in charge of accommodation, flight and daily salary of technician.

3. The final acceptance of the machine is done in you place according to the signed agreement and relative technical files.

4. We guarantee for product’s maintenance, change and return after sales for one year. In this period, we can change the damaged parts for free if not your responsibility (not including easily worm parts). After this period, we can repair the machine for you only taking the basic charge.

 

logo
看不清,请点击我!
top